PLA Gloop!<\/a> to the tops and bottoms of the sections. They set up within 30 seconds, but I put some weight on them and left them alone for about two hours before continuing.<\/p>\n\n\n\nNext, I had to fit the magnets into the cabinet doors and the opposing magnets into the front faces of the cabinet sections, making sure the poles were attracting not repelling. Almost all friction-fit into place, however a couple needed a dab of CA glue.<\/p>\n\n\n\n
The biggest challenge was mounting the buttons onto the side of the original Akro-Mils organizer. These are designed to allow the screw to pass through and secure the button to the side of the organizer. The cabinet then has shaped holes that allow it to be pressed against the side of the organizer, and then slowly drop down to lock the cabinet in place. These is typically called Keyhole Slot Hangers, but my interpretation is a bit more complex. It took a while to get them mounted to the side of the organizer and I added the nuts to the screws from the inside of the organizer. Once they were secured, the side cabinet was able to easily slide onto them.<\/p>\n\n\n\n
Lastly, I mounted the shelves, put all of the items in the cabinet, and covered it up. Next week I’ll start printing the other cabinet.<\/p>\n\n\n\n
Happy Father’s Day<\/h3>\n\n\n\n
The wife, mother-in-law, and I will be heading out of town Saturday (tomorrow) morning to see my older daughter and her husband down in Miami. I’m sure they have something planned for me for the afternoon or evening. We’ll then head back home Sunday morning.<\/p>\n","protected":false},"excerpt":{"rendered":"
Not much of an update his week as I had a bunch of dental work done Monday morning and I was down for the count until Thursday. I’m back to normal now, though. Akro-Mils Side Cabinet Success! After a pretty extensive workout, my Bambu Lab P1P finished printing all of the pieces for my first […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_themeisle_gutenberg_block_has_review":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[26,4,3],"tags":[],"class_list":["post-2234","post","type-post","status-publish","format-standard","hentry","category-3d-printing","category-general","category-studio"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/posts\/2234","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/comments?post=2234"}],"version-history":[{"count":8,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/posts\/2234\/revisions"}],"predecessor-version":[{"id":2248,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/posts\/2234\/revisions\/2248"}],"wp:attachment":[{"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/media?parent=2234"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/categories?post=2234"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.chewbode.com\/index.php\/wp-json\/wp\/v2\/tags?post=2234"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"\"](\"https:\/\/www.chewbode.com\/wp-content\/uploads\/2026\/06\/akro-mils-cabinet-01-768x1024.jpg\")